24" Turntable Bearing Guide

24-Inch Turntable Bearing: Size, Load & Rotation Guide

Choosing a lazy susan bearing starts with three numbers — outer diameter, load capacity, and thickness clearance. When the build calls for a full-width rotating top, most furniture, cabinet, and display makers begin with the 24-inch lazy susan bearing class and this guide turns those specs into a clear purchase decision.

See the 24-inch Bearing Specs Ask TamBee a Question

TamBee Lazy Susan Hardware Lazy Susan Bearing 24 Inch - TamBee

The Decision Frame

Three Numbers to Know Before You Buy

This guide is built as a decision hub rather than a single product pitch. Match your project to the spec that matters most, then confirm it against the featured 24-inch hardware.

Outer & inner diameter

The ring footprint must clear your cabinet base, tabletop thickness, and swing path. Diameter is the first filter because nothing else works if the circle does not fit.

Load capacity

Add up the tabletop plus everything that sits on it. A rated capacity with margin means daily rotation stays smooth instead of grinding under weight.

Thickness clearance

The vertical gap the mechanism needs is just as important as the circle size. A 12 mm profile fits many builds that a taller bearing would push out of spec.

The Mechanics

Rotation in a Nutshell: How a Lazy Susan Bearing Turns

You do not need to be a mechanical engineer to choose turntable hardware. Three simple parts explain the entire rotation story.

1

Two concentric rings

An outer ring and a smaller inner ring sit one inside the other. Their circular race keeps every point of the tabletop on the same rotational path.

2

Ball bearings between them

Hardened steel balls ride in the channel between the rings. Instead of sliding metal on metal, the load moves across rolling points for quieter motion.

3

One ring turns, one stays put

The top ring rotates while the fixed base stays planted on your substrate. The result is the smooth, silent movement you expect from quality lazy susan hardware.

Want the fuller engineering picture? See how ball bearings make a lazy Susan turn smoothly on the TamBee journal.

Match to Your Build

Start With Your Project Type

Each project stresses a different specification. Pick your build type in the table below, then jump to the size or load detail that answers your question.

You’re building	Spec that matters most	Why
Kitchen cabinet	Diameter + thickness	The bearing must clear the cabinet footprint and leave room for the door swing and shelf hardware.
Rotating dining table	Load capacity	The ring carries the tabletop weight plus everything placed on it during everyday meals and entertaining.
Workshop turntable	Load capacity + stability	Clamping, sanding, and repositioning add changing forces that a stable full-circle bearing handles better than a small center pivot.
Retail display	Smooth rotation + mounting ease	Customers interact with displays repeatedly, so effortless turning and simple installation matter more than extreme capacity.

Size in Seconds

24-inch TamBee Bearing: Size at a Glance

These are the decision-critical numbers for the featured TamBee aluminum model. Read them against your own tabletop or cabinet clearance.

Aluminum lazy susan hardware with a full-circle rotating race.

Outer ring width600 mm / 24″
Inner ring width565 mm / 22.3″
Thickness12 mm / 0.47″
Bearing balls diameter5 mm
Load capacity175 kg / 380 lbs
MaterialHigh-quality aluminum alloy

12 mm is just under half an inch — slim enough for most tabletop and cabinet clearances. For a deeper breakdown of how ring geometry, ball size, and clearance fit together, read our lazy Susan bearing dimensions guide.

The Load Question

Why a 380 lb Rating Changes Heavy Builds

Rotating dining tables, work turntables, and permanent display platforms all punish weak hardware differently. The rated capacity tells you how much the bearing can be asked to carry while still rotating smoothly.

TamBee rates this 24-inch model at 175 kg / 380 lbs. When you calculate your build, add the tabletop material, the objects stored or displayed on it, and any downward pressure from daily use. That total should stay inside the rating with margin.

Need benchmark models from the same size class? Compare our top 5 24-inch lazy susan bearings for heavy DIY tables and rotating displays.

TamBee 24 inch aluminum lazy susan bearing mounted as rotating turntable hardware

Product Spotlight

The TamBee 24-inch Aluminum Lazy Susan Bearing

The complete size, load, and rotation package in one ring — ready for your table, cabinet, or display project.

TamBee 24 inch lazy susan bearing aluminum turntable bearing with mounting hardware

Aluminum Alloy · 24″

TamBee Aluminum Lazy Susan Bearing

★ 5.0 · 10 reviews

US$119.99

Silent and smooth rotation with no wobble on daily turns.
Simple setup: place your top on the ring, or fix it with screws for permanent builds.
Sturdy, durable aluminum alloy construction built for repeated use.
Anti-damage packaging — thickened paper carton and foam protection.

Free shipping and free 30-day returns on all orders.

View Product Page

Bulk & Trade Enquiries

Planning a Production Run or Volume Order?

Whether you are outfitting a cabinet line, stocking rotating display hardware, or sourcing components for a furniture brand, TamBee’s team can discuss quantity pricing and packaging for your order size. Send the exact bearing diameter and load requirement you need, and they will confirm fit and availability.

Email lawrence@tambee.com

Fast facts for a quote

Model: TamBee 24″ Aluminum Lazy Susan Bearing
Capacity: 175 kg / 380 lbs
Profile: 12 mm / 0.47″
Free shipping & 30-day returns

Frequently Asked Questions

what do the outer and inner ring measurements mean on this bearing?

the outer ring width is 600 mm / 24″, which describes the full circle the hardware occupies. the inner ring width is 565 mm / 22.3″, the diameter of the inner mounting ring. compare the 24″ figure to the cutout or base footprint you have available.

how much weight can the tambee 24-inch bearing hold?

the product is rated at 175 kg / 380 lbs. when calculating your build, include the tabletop or platform plus everything that will rest on it during normal use so the total stays within the rated capacity.

will a 12 mm profile fit under a normal tabletop?

12 mm equals approximately 0.47″, just under half an inch. that profile is slim enough for many tabletop and cabinet builds, but always measure your actual clearance — including any recess or spacer you plan to use — before ordering.

is this bearing suitable for a rotating dining table?

yes, for tabletops whose total weight stays within the 175 kg / 380 lbs rating. because the product combines a full 24″ ring with an aluminum alloy body and smooth ball rotation, it is a common fit for dining-size turntable builds.

do i need screws to install it?

no. you can simply place your tabletop or platform on the lazy susan parts for a tool-free setup. if you want a more permanent connection, you can fix the rings in place with screws.

what delivery and return terms apply?

the product page notes free shipping and free 30-day returns on all orders. the hardware is also packed in a thickened paper carton with foam protection to reduce shipping damage. contact the tambee team for destination-specific delivery estimates.